Suddenly, when the driver put the clothing Pipipi and the alarm is in about 3 minutes, now stop and flashes all the red LED of the display unit.
Press the opening and closing detection switch to work with the lid of the charging port, I and remove the filter view the state of the inside of the rotating part drum will turn, seems to be the back of the wing is no longer rotate.
At the same time I opened the back cover to remove the back of the screw, the belt is turning the back of the wings came out with Veron. Belt is not broken.
Black pulley of a screw that is attached to the shaft of the motor turning the lower left of the drum had become loose loose.
Tighten the screws with a No. 8 spanner, over off which was belt, make sure that there is no snag, was confirmed the rotation to close the back cover, it was successfully healed.
Only the clothes dryer does not have new is already on the market, but I thought what to do, despite repairs, we are relieved because healed easily.
Since it has elapsed from the purchase seven years, and the other for a while, it might belt is cut - to deteriorate. In this time of repair, dryer with a simple structure in addition, we found that even belt is likely to be easier to repair if you can get. Motor is long has likely to be multiplied by the unreasonable load.
I would like to note to put too much clothing.